60 Minute Fire Rating
Suitable for suspended or Modular Ceilings
Fit from above or below
Certifire Approval
Luminaire Hood
Product Description:
Intuchem Fire Rated Luminaire Hoods are tested to halt the passage of smoke and fire through a fire rated suspended or modular ceiling, where recessed luminaire systems are in place.
Without a luminaire fire hood fitted, fire and smoke would penetrate through the recessed light fitting in seconds spreading into the void or room above endangering both lives and property.
The Luminaire Hood will provide 60 minutes fire rating by completely
containing the fire and smoke within the hood, whilst at the same time
allowing the heat from the light fitting to dissipate through the hood.
Tested to BS Standard 476 part 20 & 23 clause 5
The Intuchem fire hood meets the requirements of class 0 materials and
is Certifire approved.
Features:
60 min rated
BS 476 part 20 & 23 by LPC (Loss Prevention Council)
Certifire Approval
Lightweight
Self supporting
Simple to install
Can be fitted from above or below
Suitable for suspended and modular ceilings
|
 |
 |
| Dimensions |
Weight |
Size |
Product Code |
| Square 300mm x 300mm x 150mm |
0.7 kg |
Small |
ICLHS |
| Rectangular 600mm x 300mm x 150mm |
0.9 kg |
Medium |
ICLHM |
| Square 600mm x 600mm x 150mm |
1.0 kg |
Large |
ICLHL |
| Rectangular 1200mm x 300mm x 150mm |
1.0 kg |
X Large |
ICLHLX |
| Rectangular 1200mm x 600mm x 150mm |
1.8 kg |
XX Large |
ICLHLXX |
Other Information:
View Installation or Safety (COSHH) Datasheet on this page.
LEGAL:
As part of our policy of ongoing improvements, we reserve the right to
modify, alter or change product specifications without giving notice.
Product illustrations are representations only. All information contained
in this document is provided for guidance only, and as Intuchem Ltd has
no control over the installation methods of the products, or of the prevailing
site conditions, no warranties expressed or implied are intended to be
given as to the actual performance of the products mentioned or referred
to, and no liability whatsoever will be accepted for any loss, damage
or injury arising from the use of the information given of products mentioned
or referred to herein.
The above information to the best of our knowledge is true and accurate
and based upon current test data and is supplied for your guidance only.
Customers should satisfy themselves to the suitability of the product
in its intended use and no guarantee is given or implied since the conditions
of actual use are beyond our control. Intuchem Ltd disclaim any liability
for loss, damage or other expense arising from the use of information,
data or products mentioned or referred to and reserve the right to change
any details or specifications without notice.